CH
PRIMID type polyester resin
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
Category:
PRIMID type polyester resin
PRODUCT DESCRIPTION
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
Hybrid polyester resin specification parameter table
| Model | Ratio | Curing condition ℃/min | Tg ℃ | Acid value mgkOH/g | Viscosity mPa.s | Characteristic |
| TM1510 | 50/50 | 180/10 | 53 | 70-78 | 9000-13000（175℃） | Excellent comprehensive performance, excellent leveling |
| TM1511 | 50/50 | 180/10 | 55 | 68-74 | 7500-11000（175℃） | Excellent performance, baking resistance, general purpose |
| TM1512 | 50/50 | 160/10 | 58 | 68-74 | 7500-10500（175℃） | Balanced performance, good wetting performance |
| TM1056 | 50/45 | 200/10 | 59 | 59-65 | 2500-3500（200℃） | Excellent comprehensive performance, excellent leveling |
| TM1057 | 50/50 | 180/15 | 53 | 70-76 | 12000-16000（175℃） | Excellent comprehensive performance, high resistance to yellowing |
| TM1058 | 50/50 | 180/10 | 53 | 70-76 | 9000-13000（175℃） | Fast curing, plump application |
| TM1610 | 60/40 | 180/10 | 54 | 50-56 | 8000-11000（175℃） | Excellent performance, baking resistance, general purpose |
| TM1613 | 60/40 | 180/10 | 62 | 41-47 | 3000-5000（200℃） | High glass transition temperature, general purpose |
| TM1617 | 60/40 | 180/15 | 53 | 50-56 | 8000-11000（175℃） | Excellent leveling and appearance |
| TM1068 | 60/40 | 180/15 | 53 | 50-56 | 8000-11000（175℃） | Excellent leveling and appearance Abrasive sprayable |
| TM1711 | 70/30 | 180/10 | 58 | 31-37 | 4500-6300（200℃） | Excellent comprehensive performance, general purpose |
| TM1713 | 70/30 | 180/10 | 59 | 27-33 | 5400-7600（200℃） | Good mechanical properties, general purpose |
| TP7030ME | 70/30 | 180/15 | 52 | 28-34 | 15000-19000（175℃） | Suitable for matting products, general purpose |
SOLUTIONS FOR YOUR INDUSTRY
Epoxy resin E-12 (604#) is used to prepare pure epoxy and epoxy polyester powder coatings. It can also be used in anti-corrosion coatings and insulating coatings in combination with amine curing agents. It has good electrostatic spraying performance, excellent anti-corrosion and chemical resistance, and can meet the requirements of various powder coatings such as glossy, matt, anti-corrosion, weather resistance, art, and high decoration.
Epoxy resin E-20 (601#) is suitable for the combination of amine curing agent or their adducts to form solvent-containing active coatings. Hardens at room temperature or higher for adhesives, anti-corrosion coatings, zinc primers, floor coatings, decorative coatings and varnishes. At the same time, it can improve the performance of alkyd amino coatings and improve the leveling of epoxy polyester powder coatings.
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
PROUCTS CENTER
PRIMID type polyester resin
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
category:
PRIMID type polyester resin
Product Description
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
Hybrid polyester resin specification parameter table
| Model | Ratio | Curing condition ℃/min | Tg ℃ | Acid value mgkOH/g | Viscosity mPa.s | Characteristic |
| TM1510 | 50/50 | 180/10 | 53 | 70-78 | 9000-13000（175℃） | Excellent comprehensive performance, excellent leveling |
| TM1511 | 50/50 | 180/10 | 55 | 68-74 | 7500-11000（175℃） | Excellent performance, baking resistance, general purpose |
| TM1512 | 50/50 | 160/10 | 58 | 68-74 | 7500-10500（175℃） | Balanced performance, good wetting performance |
| TM1056 | 50/45 | 200/10 | 59 | 59-65 | 2500-3500（200℃） | Excellent comprehensive performance, excellent leveling |
| TM1057 | 50/50 | 180/15 | 53 | 70-76 | 12000-16000（175℃） | Excellent comprehensive performance, high resistance to yellowing |
| TM1058 | 50/50 | 180/10 | 53 | 70-76 | 9000-13000（175℃） | Fast curing, plump application |
| TM1610 | 60/40 | 180/10 | 54 | 50-56 | 8000-11000（175℃） | Excellent performance, baking resistance, general purpose |
| TM1613 | 60/40 | 180/10 | 62 | 41-47 | 3000-5000（200℃） | High glass transition temperature, general purpose |
| TM1617 | 60/40 | 180/15 | 53 | 50-56 | 8000-11000（175℃） | Excellent leveling and appearance |
| TM1068 | 60/40 | 180/15 | 53 | 50-56 | 8000-11000（175℃） | Excellent leveling and appearance Abrasive sprayable |
| TM1711 | 70/30 | 180/10 | 58 | 31-37 | 4500-6300（200℃） | Excellent comprehensive performance, general purpose |
| TM1713 | 70/30 | 180/10 | 59 | 27-33 | 5400-7600（200℃） | Good mechanical properties, general purpose |
| TP7030ME | 70/30 | 180/15 | 52 | 28-34 | 15000-19000（175℃） | Suitable for matting products, general purpose |
SOLUTIONS FOR YOUR INDUSTRY
Epoxy resin E-12 (604#) is used to prepare pure epoxy and epoxy polyester powder coatings. It can also be used in anti-corrosion coatings and insulating coatings in combination with amine curing agents. It has good electrostatic spraying performance, excellent anti-corrosion and chemical resistance, and can meet the requirements of various powder coatings such as glossy, matt, anti-corrosion, weather resistance, art, and high decoration.
Epoxy resin E-20 (601#) is suitable for the combination of amine curing agent or their adducts to form solvent-containing active coatings. Hardens at room temperature or higher for adhesives, anti-corrosion coatings, zinc primers, floor coatings, decorative coatings and varnishes. At the same time, it can improve the performance of alkyd amino coatings and improve the leveling of epoxy polyester powder coatings.
Polyester resin is a general term for polymer compounds formed by polycondensation of diols or diacids or polyols and polyacids. Polyester resins are classified into saturated polyester resins and unsaturated polyester resins. Unsaturated polyester adhesives are mainly composed of unsaturated polyester resins, pigments and fillers, initiators and other auxiliary agents. The adhesive has low viscosity, easy wetting, and good processability. The cured adhesive layer has high hardness, good transparency, high brightness, fast curing at room temperature, good heat resistance, and excellent electrical properties. The disadvantage is that the shrinkage rate is large, the adhesive toughness is not high, the chemical medium resistance and water resistance are poor, and it is used for non-structural adhesives. Mainly used for gluing glass fiber reinforced plastics, rigid plastics, concrete, electrical can sealing, etc.
Please leave a message or contact us
Add:Weiliu Road, Qilu Chemical Industrial Park, Linzi District, Zibo City, Shandong Province
Zip code：570203
PRODUCTS AND SERVICES
ONLINE MESSAGE
©2022 Shandong Tianmai Chemical Co., Ltd. Poweredby:www.300.cn SEO
- Contact
-
Telephone
Telephone
+86-533-7488896 -
Fax
Fax
+86-533-7488895 - Top